The compact heated extractor most detail shops actually buy
The Mytee 8070 Mytee Lite is the machine that shows up in more mobile detailing vans and small shop bays than any other extractor in its size class. There is a reason for that. It heats, it fits, and it does not quit halfway through a minivan.
Most compact spotters make you pick two out of three. You get portability without heat. You get heat without suction. You get suction in a box too heavy to lift into a van alone. The 8070 is Mytee's answer to that tradeoff, and it has held its position in the category for years because the answer works.
At 45 pounds with 4-gallon tanks, the 8070 sits in the space between a true spotter and a full-size extractor. It is small enough to wheel up to a car door on the 6-inch rear wheels. It is capable enough to pull an entire interior without a refill run.
What the 1,000-watt heater actually changes
Heat is the difference between lifting a stain and smearing it.
The 8070 runs a 1,000-watt in-line heater that warms solution on the way to the tool. That matters on three jobs in particular. Ground-in salt and road film release faster in hot water. Body oils in seat bolsters and headrests break down instead of redistributing. And drying time drops, which is the part your customers notice, because nobody wants to sit on a damp seat.
In-line heating also means there is no wait for a tank to come up to temperature. You fill, you switch on, you work.
The whole machine runs on a single 25-foot 12/3 power cord. One outlet, one cord, one trip. Extractors that require two circuits are a real problem in residential driveways and older shop buildings, and the 8070 sidesteps that entirely.
Suction and pressure that match the tool
A 3-stage vacuum motor produces 130 inches of water lift at 100 CFM. The diaphragm demand pump delivers 120 PSI at 1.3 gallons per minute.
Those numbers are matched on purpose. Water lift is what pulls moisture back out of foam and padding. CFM is what moves it up 15 feet of hose. Pressure is what drives solution into the fiber in the first place. A machine strong on one and weak on another leaves carpet wet, and wet carpet is a callback.
The included 4-inch Air Lite upholstery tool is the right width for seats, door panels, floor mats, and cargo areas. The 15-foot vacuum and solution hose combo reaches across a full-size SUV from a single parking position.
Pair the extractor with a professional carpet and fabric extractor solution for automotive carpet and upholstery cleaning.
Built for people who move it every day
The 8070 body is roto-molded polyethylene. It does not dent, it does not rust, and it survives being loaded and unloaded a few thousand times.
The push handle is not an afterthought. It carries a storage basket, a hose wrap, a cord hook, a tool holster, and a brush holder, which means the machine arrives at the vehicle with everything already on it. Two-inch locking front casters hold it in place once you are working.
Small details that show up after a year of use: water-resistant switches, a lighted power cord so you know the circuit is live, the neoprene Heatguard hosewrap that keeps the hot solution line from scorching a door sill, and the A110 drain hose that empties the recovery tank without tipping 30 pounds of dirty water into a bucket.
Who this machine is right for
The 8070 fits mobile detailers, small-to-mid shop bays, dealership recon departments, and rental car or fleet operations cleaning their own vehicles.
It is a strong fit if you clean between two and eight vehicle interiors a day and need the machine to be in the van by 7 a.m. and out of it by 6 p.m.
It is probably not the right machine if you are running continuous high-volume recon on a large lot. At that level, look at the HP120 Grand Prix, which carries larger tanks and higher heat for sustained duty.
Stainless steel tool option
The 8070-SS is the same machine with a stainless steel upholstery tool in place of the standard tool. Detailers who work in high-heat environments or want a tool that will not craze after long exposure generally choose the SS. If you are unsure, the standard 8070 covers most operations.
Factory support, direct from Mytee
Mytee builds this machine in San Diego and backs it with factory technical support. If you have a question about operation, parts, or service on your 8070, Mytee's support team is the fastest and most authoritative resource, and they are the people to call first.
Mytee also publishes the full documentation library for the 8070: operator manual, quick-start guide, parts lists, wiring schematics, and instructional videos.
Warranty coverage
The 8070 carries Mytee's limited warranty. One year on parts and domestic labor across all components. Two years on the major components, meaning the pump, the vacuum motor, and the heater. Ten years on the rotationally molded housing and tanks.
Read the specifics before you buy anywhere. Coverage runs to the original purchaser and requires that the machine was purchased from Mytee or an authorized Mytee dealer.
Buy from an authorized dealer
This part costs people real money, so it is worth stating plainly.
Mytee's warranty policy says that products sold by unauthorized sellers are not covered by manufacturer warranty or support. A gray-market 8070 from a marketplace listing may look like a bargain until the heater fails in month eight and Mytee has no obligation to help.
Rightlook is an authorized Mytee dealer. Buy here and the warranty is intact from day one.
Why buy the Mytee 8070 from Rightlook
Rightlook has been in the auto enhancement industry since 1998. We train operators, we build detail shops, and we have specified equipment for thousands of auto enhancement startups.
That background shapes what we sell and how we sell it. We know which machine fits a two-bay shop versus a mobile rig versus a dealership recon line, because we have set all three up.
If you are weighing the 8070 against the HP90 or the HP120, reach out before you order and we will walk you through the differences.
Specifications
| Specification | Mytee 8070 |
|---|---|
| Model number | 8070 (8070-SS with stainless steel tool) |
| Manufacturer | Mytee LLC, San Diego, CA |
| Solution tank | 4 gallons (15.1 L) |
| Recovery tank | 4 gallons (15.1 L) |
| Heater | 1,000 watt in-line |
| Vacuum motor | Single 3-stage |
| Water lift | 130 inches |
| Airflow | 100 CFM |
| Pump | Diaphragm demand |
| Pump pressure | 120 PSI |
| Flow rate | 1.3 GPM |
| Power cord | Single 25 ft, 12/3 gauge |
| Amp draw | 19 amps at 110–120V, 60 Hz |
| Hose | 15 ft vacuum + solution combo, 1.25 in |
| Included tool | 4 in Air Lite upholstery tool |
| Dimensions with handle | 33 x 12 x 36.5 in |
| Dimensions without handle | 18 x 12 x 28.5 in |
| Net weight | 45 lbs |
| Shipping weight | 65 lbs |
| Housing | Roto-molded polyethylene |
| Wheels | 6 in rear wheels, 2 in locking front casters |
In the box
8070 machine, 15 ft vacuum/solution hose combo, 4 in Air Lite upholstery tool, neoprene Heatguard™ hosewrap, two Cuties™ QD safety covers, push handle with basket, A110 drain hose, faucet fill hose, and operator manual.
Warranty
| Coverage | Term | Notes |
|---|---|---|
| Parts and domestic labor, all components | 1 year from date of original purchase | Excludes normal wear parts. Shipping covered at Mytee's discretion. |
| Major components: pumps, vacuum motors, heaters | 2 years from date of original purchase | Replacement cost only. Does not include shipping or labor. |
| Rotationally molded housing and tanks | 10 years from date of original purchase | Replacement does not include shipping or labor. |
| Spare parts purchased direct from Mytee | 90 days from date of purchase |
Important Warranty Conditions
Warranty is valid for the original purchaser only and begins on the date of customer purchase.
Coverage requires purchase from Mytee or an authorized Mytee dealer or service center. Mytee states plainly that products sold by unauthorized sellers are not covered by manufacturer warranty or support.
Warranty is void with misapplication, abuse, lack of maintenance, negligence, abnormal use, alteration of design, use of incompatible or corrosive chemicals, use in a rental service, or service and repairs performed by anyone other than Mytee or an authorized dealer.
Products are intended for commercial, industrial, or institutional use by adults trained in their operation.
*Warranty information provided by Mytee.com and subject to change. Current as of 5/27/26.
Frequently Asked Questions
Does the Mytee 8070 have a heater?
Yes. The Mytee 8070 includes a 1,000-watt in-line heater that heats the cleaning solution as it travels to the tool, so there is no tank warm-up wait.
How many gallons is the Mytee 8070?
The Mytee 8070 has a 4-gallon solution tank and a 4-gallon recovery tank, for 4 gallons of usable cleaning capacity per fill.
How much does the Mytee 8070 weigh?
The Mytee 8070 weighs 45 pounds empty. Shipping weight is 65 pounds.
Does the Mytee 8070 need two outlets?
No. The Mytee 8070 runs on a single 25-foot 12/3 power cord and draws 19 amps at 110–120V. One standard 20-amp circuit runs the entire machine including the heater.
What is the difference between the Mytee 8070 and the 8070-SS?
The machines are identical except for the upholstery tool. The 8070 ships with the standard 4-inch Air Lite tool. The 8070-SS ships with a stainless steel version of the same tool.
Is the Mytee 8070 good for auto detailing?
Yes. The Mytee 8070 was designed for automotive interiors. Its 45-pound weight, 15-foot hose, and 4-inch upholstery tool are sized for seats, carpets, floor mats, and door panels in cars, trucks, and vans.
What is the difference between the Mytee 8070 and the HP120 Grand Prix?
The 8070 is a compact 4-gallon machine built for portability and mobile work. The HP120 Grand Prix is a larger-capacity heated extractor built for higher-volume shop and recon environments. Choose the 8070 if you move the machine daily. Choose the HP120 if it lives in a bay.
Who provides technical support for the Mytee 8070?
Mytee provides factory technical support for the 8070 direct from their San Diego facility, along with the full documentation library including the operator manual, parts lists, wiring schematics, and instructional videos.
What is the warranty on the Mytee 8070?
The Mytee 8070 carries a one-year limited warranty on parts and domestic labor for all components, a two-year warranty on major components including the pump, vacuum motor, and heater, and a ten-year warranty on the rotationally molded housing and tanks. Coverage begins on the date of purchase and applies to the original purchaser only.
Does the Mytee warranty apply if I buy from a third-party seller?
No. Mytee's limited warranty policy states that products sold by unauthorized sellers are not covered by manufacturer warranty or support. Coverage requires purchase from Mytee or an authorized Mytee dealer or service center. Rightlook is an authorized Mytee dealer.
Can the Mytee 8070 clean car carpets and upholstery?
Yes. The 8070 handles both. The 120 PSI pump drives solution into carpet fiber and seat foam, and the 130-inch water lift pulls the moisture back out to shorten dry time.