Full heat, 26 pounds, and any outlet in the building
The Mytee S-300H Tempo is the machine you carry to the job instead of wheeling.
It weighs 26 pounds. It heats water to 210 degrees Fahrenheit. It draws 12 amps, which means it runs on an ordinary household outlet without tripping anything.
That last number is the one that decides purchases. Most heated extractors demand a dedicated 20-amp circuit. The S-300H does not care. Office building, apartment garage, customer driveway, second floor with no elevator. Plug it in and work.
It hits the same temperature as machines costing twice as much
This surprises people, so it is worth stating directly.
The S-300H reaches 210 degrees Fahrenheit. That is the same maximum temperature as the Mytee HP90 and the HP120, machines that cost more than double.
The big machines get there with 1,200 watts because they are heating far more water and holding temperature across a long run. The S-300H gets there with 600 watts because it is heating one gallon.
For spot work, the result at the tool is the same. Hot water breaks the bond between soil and fiber instead of diluting it. Body oils in seat foam liquefy rather than smear. Coffee, soda, and protein stains release without repeated wetting.
Heat is the variable most detailers underuse, and this is the cheapest way to have it.
Be honest about what it is
The S-300H is a spotter. It is not a full-interior extractor, and any seller telling you otherwise is setting you up for a bad afternoon.
The numbers say it plainly. One gallon of solution. 55 PSI. 85 inches of water lift at 97 CFM. Compare that to the Mytee 8070, which carries 4 gallons, delivers 120 PSI, and pulls 130 inches of lift.
| Specification | Mytee S-300H | Mytee 8070 |
|---|---|---|
| Solution tank | 1 gallon | 4 gallons |
| Pump pressure | 55 PSI | 120 PSI |
| Water lift | 85 inches | 130 inches |
| Airflow | 97 CFM | 100 CFM |
| Heater | 600 watts to 210°F | 1,000 watts |
| Net weight | 26 lbs | 45 lbs |
| Amp draw | 12 amps | 19 amps |
| Circuit needed | Standard household outlet | 20-amp circuit |
What you give up is capacity and extraction depth. What you get back is 19 fewer pounds and the ability to plug into anything.
Who actually buys this machine
Mobile detailers running express and interior-only services. One gallon covers spot work, seats, and floor mats on several vehicles. The machine goes from van to vehicle in one hand.
Shops that already own a full-size extractor. The S-300H becomes the grab-and-go unit for a quick stain call, a delivery-day touch-up, or a customer waiting in the lobby. It saves you from firing up the big machine for a coffee spill.
Dealership lots and rental counters. Interior touch-ups between customers, without pulling a car into the detail bay.
Operations working where power is limited. Older buildings, residential driveways, upper floors. Twelve amps goes anywhere.
If you clean multiple full interiors a day, buy the Mytee 8070 instead. One gallon will frustrate you by the second vehicle.
Built to be carried
The housing is roto-molded polyethylene. It does not rust, it does not dent, and it survives being thrown in and out of a vehicle daily.
At 20 by 10 by 16.5 inches it fits behind a seat or in a trunk alongside everything else. Four 2-inch casters mean it still rolls when you would rather not carry it.
The 25-foot power cord reaches across a parking space. The 8-foot vacuum and solution hose keeps the working end close, which is what you want on detail work rather than the long reach of a full-size machine.
The included 4-inch Air Lite™ upholstery tool is hardened plastic, sized for seats, door panels, floor mats, and cargo areas.
The non-heated version
The Mytee S-300 Tempo is the same platform without the heater and costs less.
The heater is worth the difference for most detail work. Hot water does in one pass what cold water needs three passes to accomplish, and the extra passes leave more moisture in the seat. If you already run hot water from another source, or your work is light, the S-300 is a reasonable saving.
Factory support, direct from Mytee
Mytee builds this machine in San Diego and backs it with factory technical support. For questions about operation, parts, or service on your S-300H, Mytee's support team is the fastest and most authoritative resource, and they are the people to call first.
Mytee publishes the full documentation library for the S-300H, including the operator manual, parts lists, and wiring schematics.
Buy from an authorized dealer
This part costs people real money, so it is worth stating plainly.
Mytee's warranty policy says that products sold by unauthorized sellers are not covered by manufacturer warranty or support. A gray-market S-300H from a marketplace listing may look like a bargain until the heater fails in month eight and Mytee has no obligation to help.
Rightlook is an authorized Mytee dealer. Buy here and the warranty is intact from day one.
Why buy the Mytee S-300H from Rightlook
Rightlook has been in the auto enhancement industry since 1998. We train operators, we build detail shops, and we have specified equipment for thousands of auto enhancement startups.
That background shapes what we sell and how we sell it. We know which machine fits a two-bay shop versus a mobile rig versus a dealership recon line, because we have set all three up.
If you are deciding between the S-300H and the Mytee 8070, reach out before you order and we will walk you through it.
Specifications
| Specification | Mytee S-300H Tempo |
|---|---|
| Model number | S-300H |
| Manufacturer | Mytee LLC, San Diego, CA |
| Solution tank | 1 gallon |
| Heater | 600 watt |
| Maximum temperature | 210°F |
| Vacuum motor | 2-stage |
| Water lift | 85 inches |
| Airflow | 97 CFM |
| Pump pressure | 55 PSI |
| Power cord | 25 ft |
| Amp draw | 12 amps at 115V |
| Circuit required | Standard household outlet |
| Hose | 8 ft vacuum and solution combo |
| Included tool | 4 in Air Lite™ hardened plastic upholstery tool |
| Dimensions | 20 x 10 x 16.5 in |
| Net weight | 26 lbs |
| Housing | Roto-molded polyethylene |
| Casters | Four 2 in casters |
In the box
S-300H Tempo machine, 8 ft vacuum and solution hose combo, 4 in Air Lite™ upholstery tool, operator manual.
Warranty at a glance
The S-300H carries Mytee's limited warranty. One year on parts and domestic labor across all components. Two years on the major components, meaning the pump, the vacuum motor, and the heater. Ten years on the rotationally molded housing and tanks.
Coverage runs to the original purchaser and requires that the machine was purchased from Mytee or an authorized Mytee dealer. Read the full Mytee Limited Warranty Policy before you buy anywhere.
| Coverage | Term |
|---|---|
| Parts and domestic labor, all components | 1 year from date of original purchase |
| Major components: pump, vacuum motor, heater | 2 years from date of original purchase |
| Rotationally molded housing and tanks | 10 years from date of original purchase |
| Spare parts purchased direct from Mytee | 90 days from date of purchase |
What the warranty does not cover
Warranty is valid for the original purchaser only and begins on the date of customer purchase.
Coverage requires purchase from Mytee or an authorized Mytee dealer or service center. Products sold by unauthorized sellers are not covered by manufacturer warranty or support.
Coverage is void with misapplication, abuse, lack of maintenance, negligence, abnormal use, alteration of design, use of incompatible or corrosive chemicals, use in a rental service, or service and repairs performed by anyone other than Mytee or an authorized dealer.
Normal wear parts are not covered. Major component and housing coverage does not include shipping or labor.
These products are intended for commercial, industrial, or institutional use by adults trained in their operation.
Read the full Mytee Limited Warranty Policy for complete terms.
Frequently Asked Questions
How hot does the Mytee S-300H get?
The Mytee S-300H Tempo heats water to 210 degrees Fahrenheit using a 600-watt heater. That is the same maximum temperature as Mytee's larger HP90 and HP120 extractors.
Does the Mytee S-300H need a special outlet?
No. The Mytee S-300H draws 12 amps at 115 volts and runs on a standard household outlet. It does not require the dedicated 20-amp circuit that larger heated extractors need.
How much does the Mytee S-300H weigh?
The Mytee S-300H weighs 26 pounds, light enough for one person to carry.
How many gallons is the Mytee S-300H?
The Mytee S-300H has a 1-gallon solution tank, which is what makes it a spotter rather than a full-interior extractor.
What is the difference between the Mytee S-300 and the S-300H?
The S-300H includes a 600-watt heater that brings water to 210 degrees Fahrenheit. The S-300 is the same platform without the heater and costs less.
Is the Mytee S-300H a real extractor or just a spotter?
The S-300H is a heated spotter. It delivers 55 PSI and 85 inches of water lift from a 1-gallon tank, which suits spot cleaning, seats, floor mats, and interior touch-ups. For full interiors back to back, a larger machine such as the Mytee 8070 is the better tool.
Can the Mytee S-300H clean car seats and carpets?
Yes. The S-300H was built for automotive interiors. The 4-inch upholstery tool and 8-foot hose are sized for seats, door panels, floor mats, and cargo areas, and the 210-degree heat lifts body oils and set-in stains.
What is the difference between the Mytee S-300H and the Mytee 8070?
The 8070 is a full detailing extractor with a 4-gallon tank, 120 PSI, and 130 inches of water lift, weighing 45 pounds. The S-300H is a 26-pound spotter with a 1-gallon tank, 55 PSI, and 85 inches of lift. The S-300H runs on a standard outlet while the 8070 draws 19 amps. Choose the S-300H for portability and spot work, and the 8070 for full interiors.
What is the warranty on the Mytee S-300H?
The Mytee S-300H carries a one-year limited warranty on parts and domestic labor for all components, a two-year warranty on major components including the pump, vacuum motor, and heater, and a ten-year warranty on the rotationally molded housing and tanks. Coverage begins on the date of purchase and applies to the original purchaser only.
Does the Mytee warranty apply if I buy from a third-party seller?
No. Mytee's limited warranty policy states that products sold by unauthorized sellers are not covered by manufacturer warranty or support. Coverage requires purchase from Mytee or an authorized Mytee dealer or service center. Rightlook is an authorized Mytee dealer.
Who provides technical support for the Mytee S-300H?
Mytee provides factory technical support for the S-300H direct from their San Diego facility, along with the full documentation library including the operator manual, parts lists, and wiring schematics.